Monitoring Alarm Systems

Approx. Rs 1,000 / PieceGet Latest Price

The SELCO Analogue Alarm Monitor M3000 is a compact and versatile alarm panel, designed for demanding marine and industrial applications. The M3000 Alarm Monitor features 24 inputs and 14 outputs. The inputs can be configured individually for dry contact (NO or NC) inputs or analogue inputs. Analogue inputs can read measurements from i.e. temperature sensors TC or PT100, pressure sensors, flow sensors, etc., through 4-20 mA or 0-10 V DC transmitters.

The SELCO Analogue Alarm Monitor M3000 is easy to install and configure and can be used in a widespread range of applications, where there is a need for reliable monitoring of analogue and digital alarm inputs. The M3000 alarm monitor is equipped with a RS485 interface supporting MODBUS-RTU communication for connection to a master unit, such as an HMI panel.

Additional Information:

Approx. Rs 1,000 / PieceGet Latest Price

The SELCO M1000 is an Alarm Monitor capable of surveying the state of up to 10 potential free contacts.

The inputs of the M1000 can be used to monitor both normally open (NO) and normally closed (NC) contacts. Each contact can be sourced to a positive or negative reference. The M1000 includes a total of 10 inputs and 10 outputs. Each input controls two bright red LEDs and an open collector output. A built-in relay provides audible alarm through control of an external siren. An input from a dry contact  will cause a corresponding LED to flash. Simultaneously a common alarm output and a siren output will be activated as well as an individual output.

The first incoming alarm is indicated with a quick flashing light, following alarms are indicated with slow flashing light. LEDs will keep flashing until the alarms are acknowledged, even though the input signal has been deactivated. Pressing the RESET pushbutton will acknowledge all new alarms whereby all flashing LEDs will change to steady light, provided that the related inputs are still active. Pressing the RESET push button will also silence the siren. The reset sequence is programmable.

With protection class IP56, the M1000 Alarm monitor is built for the toughest environments, espescially the wettest marine ones. The unit is well-proven and widely recognised by professionals world-wide and is installed in numerous applications in marine, offshore and industrial applications, ranging from applications with just a few alarm points to more than hundreds.

• • 10 input channels with LED indication (NO or NC contacts)
  • 10 programmable output channels
  • Paper label for alarm description
  • Special indication of first alarm
  • Programmable reset sequence
  • Built-in siren relay
  • RS232 based configuration
  • RS485 MODBUS-RTU
  • IP56 protection rating
  • Certified for marine use

Additional Information: